Setup Network; Use Philips Easylink; Play; Play A Disc - Philips BDP7500SL User Manual

• The language options may vary from
different regions.
4
Press to select a language, then press OK.

Setup network

To enjoy software updates of this product and BD-
Live bonus contents for certain Blu-ray discs, set up
the network connection.
Note
•
Ensure that the network cable is properly connected and
the router is switched on.
1
Connect this product to the broadband
modem or router.
2
In the Home menu, select [Settings] and press
OK.
3
Select [Advanced Setup], then press .
4
Select [Network], then press OK.
5
Select [Next] in the menu, then press OK.
»
This product starts to detect if there is a
connection to the network.
»
If the connection test fails, select
and press OK to re-connect again to the
network.
6
Once connected, an IP address is obtained
automatically.
• If no IP address is obtained, select
[Retry] and press OK to try to obtain
the IP address again.
7
Select [Finish] in the menu, then press OK to
exit.
Note
•
This product does not support automatic detection of an
Ethernet crossover cable.
•
Loading BD-Live content from the internet may take
some time, depending on the file size and the speed of
the internet connection.

Use Philips EasyLink

This product supports Philips EasyLink which uses the
HDMI CEC (Consumer Electronics Control) protocol.
You can use one single remote control to control
EasyLink-compliant devices that are connected
through HDMI connectors.
12 EN
•
One-touch play
1
One-touch standby
1
[Retry]
•

5 Play

Play a disc

•
•
1
2
3
Note
To enable the EasyLink feature, you must turn on the HDMI
CEC operations on the TV and on other devices connected
to TV. Refer to the TVs/devices manual for details.
Press the STANDBY
product.
»
The TV (if the TV supports one-touch play)
automatically turns on and switches to the
correct video-in channel.
»
If a disc is loaded in this product, disc play
automatically starts.
Press and hold the STANDBY
more than 3 seconds.
»
All the connected devices (if the device
supports one-touch standby) automatically
switch to standby.
Note
Philips does not guarantee 100% interoperability with all
HDMI CEC devices.
Caution
Do not place any objects other than discs into the disc
compartment.
Do not touch the disc optical lens inside the disc
compartment.
Press to open the disc compartment.
Insert a disc with its label facing up.
Press to close the disc compartment and
start disc play.
• To view disc play, turn on the TV to the
correct viewing channel for this product.
• To stop disc play, press
button to turn on this
button for
.