Note
•
If the setting is not compatible with the TV, a blank
screen appears. Wait for 10 seconds for auto recovery.
•
Copy protected DVDs can only output 480p/576p or
480i/576i resolution.
[Picture Settings]
Select a predefined set of picture color settings.
•
[Standard] – Original color setting.
•
[Vivid] – Vibrant color setting.
•
[Cool] - Soft color setting.
•
[Action] – Sharp color setting. It enhances
the details in the dark area. Ideal for action
movies.
•
[Animation] – Contrast color setting. Ideal for
animated pictures.
Audio setup
1
Press
.
2
Select [Setup], and press OK.
3
Select [Audio Setup], and press .
Video Setup
Audio Setup
Network Setup
EasyLink Setup
Preference Setup
Advanced Setup
4
Select an option, then press OK.
5
Select a setting, then press OK.
•
To return to the previous menu, press
BACK.
•
To exit the menu, press
[Night Mode]
Increase a soft sound level such as dialogue to
make it easier to hear at a low volume, while
simultaneously decreasing a loud sound level.
•
[Auto] - Detect and select a best sound level
at a low volume. Applicable to tracks with
Dolby TrueHD audio only.
•
[On] – For quiet viewing at night.
•
[Off] – For surround sound with a full dynamic
range.
[Neo 6]
A post processing by DTS to generate a surround
sound effect from 2 channel audio.
•
•
•
[HDMI Audio]
Select an HDMI audio output when you connect
this product and the TV/audio device with an HDMI
cable.
•
•
[Digital Audio]
Select an audio format for the sound output from
Off
the DIGITAL OUT jack (coaxial/optical).
Off
•
Auto
•
Auto
On
•
.
[PCM Downsampling]
Set the sampling rate for PCM audio output from
the DIGITAL OUT jack (coaxial/optical).
•
•
Network setup
1
2
3
Note
•
Applicable only to Dolby encoded DVD-video or BD-
video.
[Cinema] – Enable Neo 6 post processing to
the cinema mode.
[Music] - Enable Neo 6 post processing to the
music mode.
[Off] – Disable Neo 6 post processing.
[Bitstream] – Select the best original HD
audio experience (only via an HD audio
compatible receiver).
[Auto] – Detect and select the best supported
audio format automatically.
[Auto] - Detect and select the best supported
audio format automatically.
[PCM] - The audio device does not support
multi-channel format. Audio is downmixed to
two-channel sound.
[Bitstream] - Select the original audio to
experience Dolby or DTS audio (BD-video
special sound effect is disabled).
Note
•
Ensure that the audio format is supported by the disc
and the connected audio device (amplifier/receiver).
•
When
[Bitstream] is selected, interactive audio like
button sound is muted.
[On] - PCM audio is down-sampled at 48kHz.
[Off] - For BD or DVD recorded in LPCM
without copyright protection, two-channel
audio signals up to 96 kHz are output as LPCM
signals with no conversion.
Press
.
Select [Setup], and press OK.
Select [Network Setup], and press .
EN
17