Base Unit Indicator Status - Epson ELPWP20 User Manual

Base Unit Indicator Status

The indicator on the base unit indicates the base unit status and lets you know
when a problem occurs. Check the status and color of the indicator and then
refer to this table for a solution.
If the indicator displays a pattern not listed in the table below, turn the
base unit off, unplug it, and contact Epson for help.
Status indicator
A
Base unit status
Indicator status Problem and solutions
Lit blue Normal operation.
Flashing blue Warming up, shutting down, or initializing the base unit.
Remote control operations may be disabled when the
indicator is flashing blue.
Off Standby or sleep mode.
Indicator status Problem and solutions
Lit orange Base unit has overheated and turned off. Leave it turned
off to cool down for 5 minutes.
• Make sure the environmental temperature is not too
hot.
• If the problem persists, unplug the base unit and
contact Epson for help.
Flashing orange Internal base unit error.
Turn the base unit off, unplug it, and contact Epson for
help.
105