Table of Contents
Advertisement
KR-ASO70/KR-A4D70 (En)
Make
connection as shown below. When connecting the
=
:
2
Malfunction of microcomputer
related system
components,
refer also to the instruction
f manuats of the related components.
Ris
If operation is not possible or erroneous display appears
Do not plug in the power lead until all connections are
even though all connections have been made properly,
completed.
reset the microcomputer referring to "In case of diffi-
Video deck 1
Video deck 2
Audio out
Audio out
To wall AC outlet
SPEAKER IMPEDANCE SELECTOR
oN
SPEAKEAS
(Aor 8 4-162
Aand 5 16)
IMPEDANCEISELECTOR
ace ESS Tana
pan
1 OPO
te
ADA More,
U.S.A. and
Canada
od Ten
@
A
REC
PLAY
{IN}
(OUT)
Turntable
Automatic operation
When this unit is connected to KENWOOD system components such as a cassette deck and CD player through system contro! cords and the input
source is selected with the INPUT SELECTOR, the selected component starts to play automatically. inversely, playing a component automatically
selects that source as the input to this unit. The automatic operation also occurs when the provided remote control is used.
{Automatic operation is not possible with Tape deck 2 or Video machines.)
1. Connect ail cords firmly. If connections are loose, there could be loss of sound or noise produced.
me
2, When plugging and unplugging connection cords, be sure to first remove the power cord from the AC outlet. Plugging / unplugging
ASP
connection cords without removal of the power cord can cause malfunctions or damage to the unit.
we
. Do not connect up a power source which is larger than that indicated on the socket at the rear of the unit.
. Insert the system control plugs completely into the jacks.
5. If the system control cords or audio cords are not connected properly, the remote control or automatic operation between system
components will not work properly.
onium
hb &
Advertisement
Table of Contents
