Table of Contents
Advertisement
8 | Horizontal Configurability
6.
Rotate the blower into its new position.(Figure#11)
Figure # 11
7.
Remove and retain remaining bracket by removing
(2) screws. (Figure #12)
Figure # 12
8.
Remove the blower assembly by sliding it forward.
(Figure #13)
Unit top is notched to allow blower to slide through.
Figure # 13
8733942411 (2017/07)
9.
Remove and discard blower collar by removing (8)
screws. (Figure #14)
1
10. Reorient the blower assembly 180 degree with
blower "belly" down and slide back into the cabinet.
(Figure #15)
1
11. Reinstall bracket in the new vertical position using
(2) screws. (Figure #16)
Subject to change without prior notice
SM Series Heat Pump
Figure # 14
2
Figure # 15
Figure # 16
SM Series Heat Pump
2
Advertisement
Table of Contents
