Dell Inspiron 27 7720 All-in-One Owner's Manual page 106

Table 37. System setup options—Update, Recovery menu (continued)
Update, Recovery
BIOS Downgrade
Allow BIOS Downgrade
SupportAssist OS Recovery
BIOSConnect
Dell Auto operating system Recovery
Threshold
Table 38. System setup options—System Management menu
System Management
Service Tag
Asset Tag
AC Behavior
Wake on LAN/WAN
Diagnostics
OS Agent Request
Power-on-Self-Test Automatic
Recovery
Table 39. System setup options—Keyboard menu
Keyboard
Keyboard Errors
Enable Keyboard Error Detection
Numlock LED
Enable Numlock LED
106 BIOS Setup
NOTE: BIOS Recovery from Hard Drive is not available for self-encrypting
drives (SED).
This field controls the flashing of the system firmware to previous revisions.
By default, the option is enabled.
Enable or disable the boot flow for SupportAssist OS Recovery tool in the
event of certain system errors.
By default, the option is enabled.
Enable or disable cloud Service operating system recovery if the main operating
system fails to boot with the number of failures equal to or greater than the
value specified by the Auto operating system Recovery Threshold setup option
and local Service operating system does not boot or is not installed.
By default, the option is enabled.
Controls the automatic boot flow for SupportAssist System Resolution Console
and for Dell operating system Recovery Tool.
By default, the threshold value is set to 2.
Displays the Service Tag of the system.
Create a system Asset Tag.
Displays the options for Wake on LAN/WAN.
By default, the Disabled option is selected.
Enable or disable Dell OS agents to schedule onboard diagnostics.
By default, the option is enabled.
Enable or disable the BIOS to automatically recover the system.
By default, the option is enabled.
Enable or disable keyboard related errors to be reported when the system
boots.
By default, the option is enabled.
Enable or disable whether Numlock LED should be on when the system boots
By default, the system is enabled.