Panasonic SC-AK520 Operating Instructions Manual page 15

Sound quality/sound field
Press [PRESET EQ] to select a setting.
Every time you press the button:
HEAVY -,_ SOFT --,.- CLEAR --_ DISCO -,-- LIVE --_ HALL
t
EQ-OFF • I
(cancelled)
HEAVY (sound quality) : Adds punch to rock
SOFT (sound quality)
CLEAR (sound quality):
DISCO (sound field)
LIVE (sound field)
HALL (sound field)
: For background music
Clarifies higher sounds
: Produces sound with the same kind of
lengthy reverberations heard at a disco
: Makes vocals more alive
: Adds an expansiveness to the sound to
produce the atmosphere of a great concert
hall
You cannot use PRESET EQ and SUPER SOUND EQ together.
You can enhance the bass and treble effect of the sound.
Press [SUPER SOUND EQ].
Remote control: Press [S.SOUND EQ].
The button light comes on.
Press the button again to cancel.
The button light goes out.
Press [SUBWOOFER].
Remote control: Press [SHIFT] + [S.WO©FER].
The button light comes on.
Each time you press the button:
MID (medium) _ MAX [high) _ Light off (off)
1 I
To cancel
Press [SUBWOOFER] to turn the light off.
Remote control: Press [SHIFT] + [S.WOOFER].
You cannot use this function when headphones are connected.
Use outdoor antenna if radio reception is poor.
I FM outdoor antenna
FM outdoor antenna
(not included)
-- 75 _ coaxial cable (not included)
30 ram
(13q6")
@ _ Shield braid
15ram
d9/3_') _ Core wire
• Disconnect the FM indoor antenna.
• The antenna should be installed by a competent technician.
Other functions
AM outdoor antenna
AM outdoor antenna (not included)
antenna
(included)
Run a piece of vinyl wire horizontally across a window or other
convenient location.
Leave the loop antenna connected.
Disconnect the outdoor antenna when the unit is not in use.
Do not use the outdoor antenna during an electrical storm.
Rearpane, of' [
this unit /
Analog player
(not included)
• An analog player with a built-in phone equalizer can be connected.
• For details, refer to the instruction manual of the units which are to
be connected.
• When units other than those described above are to be connected,
please consult your audio dealer.
(See above for external unit connection.)
1. Press [AUX].
The unit comes on.
2. For listening: Proceed to step 3.
For recording: Press [o, REC] (recording starts).
3. Start playback from the external source. (For details, refer to the
external unit's instruction manual.)
Reduce the volume level and connect the headphones.
Plug type: 3.5mm (V8") stereo
Avoid listening for prolonged periods of time to prevent hearing damage.
When the unit is first plugged in, a demonstration of its functions may
be shown on the display.
If the demo setting is off, you can show a demonstration by selecting
"DEMO ON".
Press and hold [DISP, -DEMO].
The display changes each time the button is held down.
NO DEMO (off) ca. DEMO ON (on)
While in the standby mode, select "NO DEMO" to reduce power
consumption.
DEM© function cannot be turned on when Dimmer is on.
RQT7330