Cleaning; Storage; Disposal And Protection Of The Environment - Parkside PWSA 18 A1 Translation Of The Original Instructions

Always check the device before using it for
obvious deiciencies such as loose, worn
or damaged parts, correct the position-
ing of screws or other parts. Examine the
grinding disc in particular. Exchange the
damaged parts.

Cleaning

Do not use any cleaning agent or
solvent. Chemical substances can
etch the plastic parts of the device.
Never clean the device under
running water.
• Thoroughly clean the device after every
use.
• Clean the ventilation openings and the
surface of the device with a soft brush
or cloth.

Storage

• Store the appliance in a dry place well
out of reach of children.
• In order to keep the battery well
charged, avoid exposing the appliance
to extreme heat or cold in storage.
• Remove the battery before storing the
unit for longer periods of time.
• Grinding discs must be dry and stored
upright and should never be stacked.
Disposal and protection
of the environment
Remove the battery from the device and
take the device, battery, accessories and
packaging for environmentally friendly
recycling.
Machines do not belong with domes-
tic waste.
Do not dispose of batteries in
household waste, ire (risk of explo-
sion) or water. Damaged batteries
may damage the environment and
your health if toxic fumes or liquids
leak out.
• Return the unit to a recycling centre.
The plastics and metals in the unit can
be sorted and appropriately recycled.
Ask our Service Centre for details.
• Dispose of batteries in discharged condi-
tion. We recommend covering the pole
with adhesive tape to prevent a short
circuit. Do not open up the battery.
• Dispose of batteries in accordance with
the local regulations. Take batteries to an
old battery collection point where they
will be recycled in an environmentally
friendly manner. For information about
this, ask your local waste management
company or our service centre.
• Defective units returned to us will be
disposed of for free.
GB IE CY
21