Connecting the Management Ports
Connecting the Console Port
Prepare a console cable.
Insert the RJ45 connector of the console cable into the console port on the switch.
Connect the DB9 female connector on the other end of the console cable to the serial port
on the computer host.
Connecting the ETH Port
Prepare an standard RJ45 Ethernet patch cable.
Insert one end of the RJ45 Ethernet patch cable to the computer RJ45 port.
Connect the RJ45 connector on the other end of the patch cable to the ETH port on the
switch
www.qsfptek.com
V2.0
0
7 / 12