Status Information And Diagnostics; System Information - Gigaset Fusion Manual

System information

Status information and diagnostics

System information
Show information on the configuration and status of the system.
In the Display menu
Service
Device
SW Version
Variant
LAN MAC Address
LAN IP Address
WiFi MAC Address
WiFi IP Address
Total operating time
Operating time
On the web interface
Settings
Device name in the
network
LAN MAC address
LAN IP address
WiFi MAC address
WiFi IP address
RFPI
MAC ID
LAN port
PC port
96
Info
Device name of the phone on the local network. This may vary from
the internal name of the phone shown on the display.
Firmware currently installed on the phone
Firmware variant, normally: Default
Hardware address of the LAN interface, 12 digits.
If the phone is connected via LAN:
The phone's IP address on the local network
Hardware address of the WLAN interface, 12-digit.
If the phone is connected via WLAN:
IP address of the phone's WLAN interface.
Operating time since commissioning in days, hours and minutes
Operating time since last system start in days, hours and minutes
Service System status
Device name of the phone on the local network. This may vary from
the internal name of the phone shown on the display.
Hardware address of the LAN interface, 12 digits.
If the phone is connected via LAN:
The phone's IP address on the local network
Hardware address of the WLAN interface, 12-digit.
If the phone is connected via WLAN:
IP address of the phone's WLAN interface.
Radio Fixed Part Identity of the base station. The RFPI is the unique
identification of the DECT interface.
Consists of the 12-digit MAC address and a 4-digit code.
Programmed by the manufacturer and makes the device uniquely
identifiable for certain services, suchas redirect (URL forwarding) or
licensing.
Technical specifications of the LAN connection, e.g. 100 MBit full
duplex
Technical specification of the PC connection, e.g. 10 MBit full duplex
IP configuration