Kenwood KR-A5040 Service Manual page 4

KR-A5040
DISASSEMBLY FOR REPAIR
Note: Remove the case before starting.
Removing the front panel and sub-panel How to remove the repairing chassis
1.
Remove the five screws @ and three claws @, then
1. Cut the four parts @
of the repairing chassis.
remove the front panel. Remove the repairing chassis from main chassis.
2. Remove the four screws €} and two claws@ , then
remove the sub-panel.
Removing the main PC board After repair
The main PC board can be removed even if the front panel 2. Turn the repairing chassis 180 degrees in the arrow
and sub-panel have not been. direction @.
3. Insert the two claws @} into main chassis.
1. Remove the three screws @. 4. Lock to the main chassis by three screws (M3 x 6)€).
2. Remove the eight screws (2)
3. Remove the two screws @).
4. Remove the six screws O ,
5. Remove the main PC board in the direction of arrow
©.