1
1.4 NOTES ON ASSEMBLING
Note : The right and left positions for the attachment positioning of digital amplifier block are gradual, however, adjust the
A
front and back positions correctly. For the positioning procedure, refer to "7. DISASSEMBLY".
When assembling the digital amplifier block, please note the following points of screws to prevent from short-circuit.
The following 7 points of screws must always be used AMZ30P060FTC
B
IR BUFFER ASSY
C
Points to be watched for swarf
Accessory of Panel Base
D
E
F
If a screw at any of these points needs to be removed for service,
be sure to check that the swarf is not on the screw before refastening.
6
1
2
Rear Panel
SC-63
2
3
IR Cover
BUFFER GND ASSY
D-AMP_S ASSY
• Front View
3
4
4