Yamaha Electone Stagea ELS-01C New Features Manual page 5

Editing an Existing Next Regist
● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
You can move the entered Next Regist, or delete the Next Regist from the sequence.
To move an entered Next Regist:
1
Move the cursor and select the Next Regist you want to move.
2
Change the position by pressing the Bar/Beat/Clock buttons in
the display.
3
Press the NEXT REGIST [SET] button in the display.
The Next Regist position is changed and displayed in the proper order.
To erase an entered Next Regist:
1
Move the cursor and select the Next Regist you want to delete.
2
Press the [DELETE] button to delete the Next Regist.
Next Regist Loading Time
• Loading Next Regist may take a few seconds (the time may differ depending on
the size of the data to be loaded).
• When using a floppy disk instead of SmartMedia card, the loading time will be
longer than when using SmartMedia.
• Next Registration data can be loaded by two ways: using right footswitch and
programming Next Regist in the Registration Sequence. Loading time is the same
regardless of which way you load the Next Registration data.
ELS-01/01C Version 1.6 New Functions 5