Description; Construction And Mode Of Operation; Sprint Airfluid Xe - WAGNER SPRINT XE Translation Of The Original Operating Manual

Operating manual Manual Powder System SPRINT XE
5 Description
5 DESCRIPTION
5.1 CONSTRUCTION AND MODE OF OPERATION
5.1.1 Sprint Airfluid XE
5
4
1
P_02641
1 Equipment trolley
2 EPG-Sprint XE control unit
3 PEM-X1 manual gun
4 Suction tube, ST 550/10
Mode of operation:
The feed unit (4) is inserted directly into the original tank. The powder is fed through the
powder injector (5) to the powder spray gun (3). Due to the special arrangement of the
suction crown and the vibration of the tank, a homogeneous powder/air mixture is
generated and maintained during the entire duration of the powder removal. The powder
quantity and the electrostatic charge of the paint powder are regulated by the control unit
(2). The fluid air setting is done using the throttle (6).
Order number 2354920 | Edition 01/2023
2
3
6
7
5 Powder injector, PI-F1
6 Fluid air throttle
7 Vibration table
17