Description/ Scope Of Delivery; Field Of Application - WAGNER W 575 FLEXIO Manual

W 570 Flexio
•
Never open the device yourself in order to carry out repairs in the electrical system!
•
The units may only be used with a functional valve. If paints rises in the ventilating
hose (Fig. 1, item 15) do not operate the unit further! Dismantle and clean the
ventilating hose, valve and diaphragm and replace the diaphragm if necessary.
•
Do not lay the spray gun.
With original WAGNER accessories and spare parts, you have the guarantee that
all safety regulations are fulfilled.

4. Description/ Scope of delivery

1) Nozzle
3) Union nut
5) Wall Extra I-Spray spray attachment
7) Air volume control
9) Air filter cover
11) Trigger
13) Container
15) Ventilating hose
17) Feed hopper (2 pcs.)
19) Standard spray attachment
21) Lubricating grease*
* This is inside the container: remove it before starting operations!

5. Field of application

Many different coating substances can be processed with the W 575.
A different spray attachment must be used, depending on the coating substance:
Coating Materials
Low-viscosity coating substances:
Water- and solvent-based paints, finishes,
primers, 2-component paints, clear
finishes, automotive finishes, staining
sealers and wood sealer-preservatives.
All coating materials with the red Perfect
Spray logo
Description/ Scope of delivery (Fig. 1)
2) Air cap (to set the working direction)
4) Spray jet width adjustment
6) Material volume adjustment
8) Spray gun rear part
10) ON/OFF switch (located on both sides)
12) Mains lead
14) Valve
16) Stirring rod
18) Practice poster
20) Replacement nozzle seal (Standard
spray attachment)*
22) Lubricating grease*
Spray attachment
Standard
GB
25