Acer XL2330W User Manual page 21

SETUP A D I STALLATIO
Effective range
Infra-Red (IR) remote control sensor is located on the front sides of the projector. Ensure to hold the remote control
at an angle within 30 degrees perpendicular to the projector's IR remote control sensor to function correctly. The
distance between the remote control and the sensor should not be longer than 6 meters (16.4 feet).
‡ Make sure that there are no obstacles between the remote control and the IR sensor on the projector
that might obstruct the infra-red beam.
‡ Make sure the IR transmitter of the remote control is not being shined by sunlight or fluorescent lamps
directly.
‡ Please keep the remote controller away from fluorescent lamps for over 2 m or the remote controller
might become malfunction.
‡ If the remote control is close to Inverter-Type fluorescent lamps, it might become ineffective from time
to time.
‡ If the remote control and the projector are within a very short distance, the remote control might
become ineffective.
‡ When you aim at the screen, the effective distance is less than 6 m from the remote control to the
screen and reflecting the IR beams back to the projector. However, the effective range might change
according to screens.
Approx. ±30°
21
English