Advertisement
a
Rear Panel
SOFT
DAMPER
THRU
PEDAL
JK
sasi
1 PEDAL
These jacks are used to connect the damper and soft pedals.
The soft pedal can be used as the sostenuto pedal by applying
the power while holding down the soft pedal.
2 MIDI
These jacks allow communication
with other gear equipped
with MIDI.
IN
Accepts MIDI data from other instruments.
OUT
Transmits MIDI data to other instruments.
THRU
Retransmits
all MIDI data coming Into the MIDI
IN
jack (for use in a chain of MIDI devices).
3 EXPRESSION pedal
This jack is for connecting an expression pedal.
The piano
also adds this effect to the signal received through the LINE
IN jack.
L
H
INE
4
Line input jacks
3
LIMONO
E/MONO
EXPRESSION
PEDAL
LINE OUT
5 Line output jacks
4
LINE IN
These
jacks
connect
two
channels
of output
from
other
electronic
instruments
to the piano's
speaker.
Use
the
L/
MONO jack when using only one input.
Note:
This
input
bypasses
the
piano's
VOLUME
control.
To adjust the balance, you must use the output volume
controls on the individual instruments.
The two-position switch adjusts the LINE IN jack sensitivity
to match the source: Low for strong inputs and High for weak
ones.
5 LINE OUT
These jacks provide stereo output to amplifiers, stereo systems,
tape recorders, or similar equipment.
The two-position switch
to the right allows you to adjust the output level to High (H)
or Low (L) to match the input impedance of the other equip-
ment.
Use the L/MONO jack when using only one output.
Advertisement
