3.3.5 Storage Configuration
Hard Disk S.M.A.R.T.
S.M.A.R.T stands for Self-Monitoring, Analysis, and Reporting Technology. It is a
monitoring system for computer hard disk drives to detect and report on various
indicators of reliability.
SATA Controller 0
Use this item to enable or disable SATA controller.
SATA Controller 0 Mode Selection
Identify the SATA port is connected to Solid State Drive or Hard Disk Drive. Press
<Ctrl+I> to enter RAID ROM during UEFI POST process.
SATA Controller 0 ALPM
Use this item to enable or disable Aggressive Link Power Management.
SATA Controller 0 SGPIO Enable
Use this item to enable or disable Serial GPIO for SATA controller.
MSAS1 (SATA0_0/1/2/3/4/5/6/7)
Select this item to configure the External SATA, Hot Plug, Spin Up Device and SATA
Device Type.
60