Acer H6800 User Manual page 32

21
Low Input Lag Use this function to make the projected screen smoothly without any
lag.
<Note> When the setting is set to "On", the 3D/Aspect Ratio/Keystone/
H. Position/V. Position/HDMI Scan Info/Tracking function will be reset
to its factory default settings.
3D 3D Mode
Choose "On" to enable DLP 3D function.
•
•
3D Format
•
•
•
•
3D Sync Invert
If you see a discrete or overlapping image while wearing DLP 3D
glasses, you may need to execute "On" to get best match of left/right
image sequence to get the correct image (for DLP 3D).
Note 1: "H. Position", "V. Position", "Frequency" and "Tracking" functions
are not supported under HDMI or Video mode.
Note 2: "HDMI Color Range" and "HDMI Scan Info" functions are only
supported under HDMI mode.
Note 3: Functions vary depending on model definition.
Note 4: 3D function is only supported for 120Hz.
On: Choose this item while using DLP 3D glasses, 120Hz 3D
capable graphics cards and HQFS format file or DVD with
corresponding SW player.
Off: Turn off 3D mode.
Auto: When a 3D identification signal is detected, the 3D format
is selected automatically.
SBS: Display 3D signal in "Side-by-Side" format.
Top and Bottom: Display 3D signal in "Top and Bottom" format.
Frame Sequential: Display 3D signal in "Frame Sequential"
format.