Supplying Power To Your Keyboard - Yamaha PORTATONE PSR-215 Owner's Manual

Supplying Power to your Keyboard
Connecting a Power Adaptor
The PSR-215 can be powered from an optional power adaptor. To connect a power adaptor follow the steps
below.
v To connect a power adaptor:
1. Make sure that the POWER switch of the keyboard is turned
off, and that the power adaptor is not plugged into a wall outlet
or power strip. |
2. Plug the power adaptor's DC IN plug into the DC IN jack at the
rear of the PSR-215.
3. Plug the power adaptor into a wall outlet or power strip.
Inserting Batteries
The PSR-215 can also be powered from six 1.5V D size (SUM-1
or R-20) or equivalent batteries.
wv To insert batteries:
1. Make sure that the POWER switch is turned off.
2. Open the battery compartment cover located on the keyboard's
bottom panel.
3. Insert the six batteries, being careful to follow the polarity
markings on the cabinet.
4. Replace the compartment cover, making sure that it locks
firmly in place.
a NR