Advertisement
HOW TO USE MPA-100 FOOT PEDAL
1. After connecting cords, set three foot pedals as instructed
by arrow A in the illustration on the left (Fig. 1). Fig. 2
shows the foot pedal positions.
2. Now the pedals can be operated.
*When
you
don't
use foot
pedals, turn
them
back as
instructed by arrow B (Fig. 1).
®To familiarize yourself with the function of the foot pedals,
set PIANO I tablet on MP-700 Control Panel to ON and turn
Total Volume
to clockwise
(9%) to proper position.. Try to
tread each pedal and strike keys.
* See 'TO OBTAIN
PIANO I SOUND" on page 8.
@DAMPER
PEDAL
1. Tread this pedal to effect sustain over all keys.
2. To cancel the effect, release damper pedal.
e@EFFECT PEDAL
A. TO OBTAIN CHORUS EFFECT
1. Set CHORUS/VIBRATO
SWITCH to
CHORUS.
©
2. Now, chorus is ready to be effected.
VIBRATO
CHORUS
3. While in playing, tread the effect pedal.
*The effect is obtained both by (1) treading and releasing
immediately, and (2) treading and keeping treading.
4. To turn
back
to normal
sound,
tread down
the effect
pedal again.
B. TO OBTAIN VIBRATO EFFECT
5. Set CHORUS/VIBRATO SWITCH to
CHORUS
VIBRATO,
@
6. Now, vibrato is ready to be effected.
VIBRATO
" MPA-100
na
GLIDE
EFFECT
DAMPER
. While
in
playing
tread
the
effect
pedal, in the same way as step 3.
. To make
vibrato
speed
faster, turn
Vibrato
Speed
Adjustment
knob
clockwise
(©) and set it at proper
position.
VIB SPEED ADJ.
. To turn back to normal sound, tread
down the effect pedal again.
eGLIDE PEDAL
1. While in playing, tread down
Glide Pedal.
2.
The
musical
intervals
of all keys are
glided
down
by a
chromatic interval.
*If you continue
playing with glide pedal down, sound
remains glided.
3. To turn back to normal intervals, release Glide Pedal.
* True value of glide pedal is demonstrated by repeated
treading and releasing during performance.
CAUTION:
Damper
and glide cannot
be effected
properly
if connection
with
MP-700
is imperfect.
Be sure to connect
perfectly.
If
you make mistake in connecting plugs into MP-700 jacks, the
operation
of the pedals will be reversed.
(See 'Basic Con-
nection" on page 6.)
eCOMBINED
USE OF PRESET TABLETS AND
RESULTING
SOUND
The
sound
tablets
can
be
quickly
switched
even
while
in performance.
Varied
sound
can
be produced
to meet
your program and performance.
SOUND _
Mellow jazz sound
Steady rock sound
Brilliant harpsichord sound
Novel piano sound upon
which
accent effect is best demonstrated,
Sound is suited for slow and
soft solo performance.
PIANO I
PIANO II
HARPSICHORD
PIANO I
+
ACCENT
Strong attack piano sound with
well-demonstrated accent effect.
By lifting treble control, the
sound is for hard rock playing.
PIANO II
+
ACCENT
eYou
can
freely set combinations
of preset tablets
other
than those listed above.
It is also possible to delicately control the sound with balance
NOI
+
Clavichord sound. With this,
HABrSISHORE
accent effect is slightly moderated.
ACCENT
PIANO I
+
HARPSICHORD
:
+
Honky-tonk piano sound.
ACCENT
+
CHORUS
BASS
Steady bass guitar sound.
BASS + BASS MUTE}
Mellow double bass sound.
BASS +ACCENT
Strong attack bass guitar sound.
control by treble and bass, decay time control, foot pedal of
MPA-100, etc.
;
Advertisement
