Yamaha DSP-A5 Owner's Manual page 39

Controlling the Components
Connected to This Unit
Example: To control a YAMAHA CD
player
2
4
5
1
Make sure that VOLUME is set to the "m"
position.
2
Set the selector dial to the
CD position.
3
Turn on the power.
4
Press INPUT.
The indicator lights up for
about three second.
5
Press CD (number 1) while
the indicator is lit.
6
Press p.
Refer to page 39 for the CD
player operation buttons.
7
Adjust the volume.
If you set the remote control with the manufacturers'
codes listed from page i at the end of this
manual, you can control other brands of components.
Refer to "Setup codes" on page 42 for details.
6
3
7
PRESET REMOTE CONTROL
37