Komatsu PC45MR-3 Operation And Maintenance Manual page 153

TRANSPORTATION
Unloading
1. Load and unload on firm level ground only. Maintain a safe distance from the edge of a road.
2. Properly apply the brakes on the trailer and put blocks (1)
under the tires to ensure that the trailer does not move.
Make the slope (2) of the ramps (3) a maximum of 15°.
3. Remove the chains and wire ropes fastening the machine.
4. Start the engine.
Warm the engine up fully.
5. Check that the travel speed boost monitor is off.
If the monitor is on, the speed is set to high speed travel, so press
the travel speed selector switch.
The monitor goes out and the speed is shifted to low speed travel.
6. Set the lock lever to the FREE position (F).
3 - 98
OPERATION