Troubleshooting - NewAir AI-100 Series Owner's Manual

SECTION 6 TROUBLESHOOTING
1 PROBLEMS, POSSIBLE CAUSES AND SOLUTIONS
Lack of water. Press "power" button to stop the unit. Fill up water then restart the unit.
If there is sufficient water, try cleaning the filter.
"Add/water" LED light
ison.
"Ice" LED light is on.
"Add/water" LED light
Ice-making cycle is
normal but no ice is made.
The ice basket is full. Gently remove ice from the ice basket.
Ensure that ice tray is in correct position, Basket may be full. Remove ice as it may be
blocking sensor.
Refrigerant liquid has leakage or pipe is the cooling system is
blocked. Verity by a qualified technician.
The ambient temperature or the water temperature is too high. Select large size of ice
by pressing "select" button.
Ice cubes are too small