Antenna Settings, Scr System And Search- Ing For Digital Channels From A Satellite Automatically - Grundig 49 VLX 9681 SP User Instructions

SETTING­FURTHER­CHANNELS
Antenna­settings,­SCR­system­
and­searching­for­digital­chan-
nels­from­a­satellite­automati-
cally
Notes:
Your TV supports SCR system (Single Chan-
7
nel Router – EN 50494).
The following description about the LNB set-
7
tings premise a substantial expertise about
the satellite systems. Ask your specialist
dealer.
1­ Open the menu with »MENU«.
2­
Select menu item »Settings« with »
< >
» « or » « and press »OK« to confirm.
3­ Select the menu item »Source« with »
<
» « and press »
– » Source« menu is active.
4­
Select the line »Automatic Channel Search«
with » « or »
V Λ
confirm.
5­ Select the option »Satellite (DVB-S/S2)«
with » « or »
V Λ
confirm.
6­
Select the line »Antenna Settings« with »
or » « and press »OK« to confirm.
Λ
– T he »Antenna Settings« menu is dis-
played.
7­ Select and set the required option for the
antenna settings with »
Satellite
Press »OK« then select the required satel-
lite with » « or »
V
confirm.
­ LNB­type­
If your antenna system is equipped with a
single-cable system multiswitch, use the op-
tion »Grundig SCR«. Press »OK« and select
the »Grundig SCR« option with »
Select the »LNB-Frequency High« line with
» « and enter the frequency with »1...0«
V
in five digits.
100­ ENGLISH
«, »
V
>
« to confirm.
V
« and press »OK« to
« and press »OK« to
« or » «:
V Λ
« and press »OK« to
Λ
<
« or »
­-----------------------------------------------------
Select the »LNB-Frequency Low« line with
» « and enter the frequency with »1...0« in
V
five digits.
Confirm the settings with »
­ LNB­Selection­
Depending on the number of LNBs, select
the option with »
»1/2« if only 1 LNB is used; if two LNBs
are used, select the required LNB
(»1/2« or »2/2«).
­ User­Band­
Select the number of the antenna socket
used with »
UB­Frequency­(MHz)
«,
Λ
Enter the required frequency for the selected
antenna socket with »1...0«.
« or
User­Band­(Sub)
Select the number of the second selected
antenna socket used with »
UB­Frequency­(MHz)­(Sub)­
Enter the required frequency for the second
selected antenna socket with »1...0«.
Notes:
Use installation equipment supported / sug-
7
gested by your SCR Switch.
Other users / receivers connected to the
«
V
7
system may be affected if the specified user
band number and frequency is changed
during installation.
User band and user band frequency is
7
specified on the SCR switch used; and each
user / receiver must select a specified user
band and user band frequency.
With SCR satellite system, auto search by
7
several users / receivers at the same time
may cause problems.
8­ Exit the antenna settings with »
9­ Select the Channel Type.
Press »
V
>
«.
want to search for only digital channels
(Digital) or only radio channels (Radio) or
both (Digital + Radio) and press »OK« to
select and mark or unmark the »Digital«
and/or »Radio« items.
« (green).

< >
« or » «.
< >
« or » «.
<
« or »

« or » « to select whether you
Λ
>
«.
« (blue).