Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Bosch WGG254FASN
Summary of Contents for Bosch WGG254FASN
- Page 1 Washing machine WGG254FASN [en] User manual and installation instructions...
-
Page 2: Table Of Contents
Further information and explanations are available online: Table of contents 1 Safety ........... 4 8 Buttons ........ 23 1.1 General information.... 4 9 Programmes ...... 25 1.2 Intended use...... 4 1.3 Restriction on user group.. 4 10 Accessories...... 29 1.4 Safe installation ...... 5 11 Laundry........ 29 1.5 Safe use ........ - Page 3 15.2 Filling the dispensers .... 33 15.3 Basic dosage ...... 34 16 Basic settings...... 35 16.1 Overview of the basic set- tings........ 35 16.2 Changing the basic set- tings........ 36 17 Programme counter .... 36 17.1 Calling up the programme counter ........ 36 18 Cleaning and servicing ... 36 18.1 Cleaning the drum....
-
Page 4: Safety
en Safety 1 Safety Observe the following safety instructions. 1.1 General information ¡ Read this instruction manual carefully. ¡ Keep the instruction manual and the product information safe for future reference or for the next owner. ¡ Do not connect the appliance if it has been damaged in transit. 1.2 Intended use Only use this appliance: ¡... -
Page 5: Safe Installation
Safety en 1.4 Safe installation WARNING ‒ Risk of electric shock! Incorrect installation is dangerous. ▶ Connect and operate the appliance only in accordance with the specifications on the rating plate. ▶ Connect the appliance to a power supply with alternating cur- rent only via a properly installed socket with earthing. ▶... - Page 6 en Safety WARNING ‒ Risk of injury! The high weight of the appliance may result in injury when lifted. ▶ Do not lift the appliance on your own. If this appliance is not correctly installed in a washer-dryer stack, the installed appliance may fall. ▶...
-
Page 7: Safe Use
Safety en ▶ Wear protective gloves when installing and transporting the ap- pliance. 1.5 Safe use WARNING ‒ Risk of electric shock! If the appliance or the power cord is damaged, this is dangerous. ▶ Never operate a damaged appliance. ▶ Never pull on the power cord to unplug the appliance. Always unplug the appliance at the mains. - Page 8 en Safety WARNING ‒ Risk of poisoning! Detergents and care products may result in poisoning if con- sumed. ▶ If accidentally swallowed, seek medical advice. ▶ Keep detergents and care products out of the reach of children. WARNING ‒ Risk of explosion! Laundry that has been pretreated with cleaning agents that con- tain solvents may cause an explosion in the appliance.
-
Page 9: Safe Cleaning And Maintenance
Safety en 1.6 Safe cleaning and maintenance WARNING ‒ Risk of electric shock! Incorrect repairs are dangerous. ▶ Repairs to the appliance should only be carried out by trained specialist staff. ▶ Only use genuine spare parts when repairing the appliance. ▶ If the power cord of this appliance is damaged, it must be re- placed by the manufacturer, the manufacturer's Customer Ser- vice or a similarly qualified person in order to prevent any risk. -
Page 10: Preventing Material Damage
en Preventing material damage If the water pressure is too high or 2 Preventing material too low, the appliance may not be able to operate properly. damage Ensure that the water pressure in ▶ the water supply system is at least ATTENTION! 100 kPa (1 bar) and max. -
Page 11: Environmental Protection And Saving Energy
Environmental protection and saving energy en Set the maximum spin speed if you 3 Environmental protec- want to dry the laundry in the tumble tion and saving energy dryer afterwards. a The drier the laundry, the shorter the programme duration when dry- 3.1 Disposing of packaging ing which, in turn, reduces energy consumption. -
Page 12: Unpacking The Appliance
en Installation and connection Replace the accessories in ques- ▶ 4 Installation and con- tion before operating the appli- ance. nection → "Accessories", Page 29 Note: The appliance has been tested 4.1 Unpacking the appliance at the factory to check it is in working order. As a result, water stains may ATTENTION! remain in the appliance. - Page 13 Installation and connection en ATTENTION! Installation loca- Requirements If residual water in the appliance tion freezes, this may cause damage to Against a wall Do not trap the the appliance. power cord or Do not install or operate this appli- ▶ the hoses ance anywhere that is liable to ex- between the wall...
-
Page 14: Connecting The Appliance
en Installation and connection Unscrew and remove all of Put on the 4 cover caps. the screws for the 4 transit bolts using a WAF 13 wrench. Push the 4 cover caps downwards. Remove the power cable from the holder. Note: To install the transit bolts to transport the appliance, perform these steps again in the reverse or- Remove the 4 sleeves. - Page 15 Installation and connection en Connect the water inlet hose to a Siphon Secure the con- tap (26.4 mm = 3/4"). nection point with a (24–40 mm) hose clamp. Sink Fix and secure the water outlet hose with an el- → Page 29. When connecting to a 21 mm = ½" Plastic pipe with Fix and secure tap, first fit the adapter with a seal-...
-
Page 16: Aligning The Appliance
en Installation and connection Use a WAF 17 wrench to tighten 4.6 Aligning the appliance the lock nuts against the housing In order to reduce noise and vibra- until they are hand-tight. tion and to prevent the appliance from moving, align the appliance cor- rectly. -
Page 17: Familiarising Yourself With Your Appliance
Familiarising yourself with your appliance en 5 Familiarising yourself with your appliance 5.1 Appliance You can find an overview of the parts of your appliance here. On certain models, specific details such as the colour and shape may differ from those pictured. 5.2 Detergent drawer Maintenance flap for the drain pump → Page 38 Note: Observe the manufacturer's in-... -
Page 18: Control Panel
en Familiarising yourself with your appliance Manual dosing compartment : Dispenser for fabric softener : Dispenser for liquid deter- gent 5.3 Control panel You can use the control panel to configure all functions of your appliance and to obtain information about the operating status. Programmes → Page 25 Programme selector → Page 30... -
Page 19: Before Using For The First Time
first time en Add washing powder that contains first time 6 Before using for the a bleaching agent to the manual dosing compartment. first time Prepare the appliance for use. first time 6.1 Starting an empty wash- ing cycle Your appliance was inspected thor- oughly before leaving the factory. -
Page 20: Display
en Display 7 Display The display shows the current settings, options or relevant information. Example: Display Display Description 0:40 Expected programme duration or programme time re- maining in hours and minutes. Program end time → "Buttons", Page 23 10.0 Recommendation for the maximum load capacity for the selected program in kg. - Page 21 Display en Display Description Prewash is activated. → "Buttons", Page 24 Rinse Hold is activated. Shortened programme length is activated. → "Buttons", Page 23 Blood The stain type is activated. Grass The stain type is activated. Red wine The stain type is activated. Cooking fat/cooking oil The stain type is activated.
- Page 22 en Display Display Description ¡ Lights up: The door is locked and cannot be opened. ¡ Flashes: The door is not closed properly. ¡ Off: The door is unlocked and can be opened. ¡ No water pressure. ¡ The water pressure from the tap is too low. The detergent drawer has not been pushed in fully.
-
Page 23: Buttons
Buttons en 8 Buttons The selection of programme settings depends on the programme that is set. Button Selection More information (Start / Pause) ¡ Start Start, cancel or pause the pro- gramme. ¡ Cancel ¡ Pause ¡ Activate Activate or deactivate a shorter pro- (Speed) gramme duration. - Page 24 en Buttons Button Selection More information (Prewash) ¡ Activate Activate or deactivate prewash, e.g. for washing heavily soiled laundry. ¡ Deactivate Note: If the intelligent dosing system is activated, the detergent will be dis- pensed automatically for the prewash and the main wash. If the intelligent dosing system is de- activated, place the detergent for the prewash directly in the drum.
-
Page 25: Programmes
Programmes en 9 Programmes Note: The laundry's care labels provide you with additional information on pro- gramme selection. Programme Description Max. load (kg) Bomull Wash hard-wearing items made from cotton, linen 10.0 (Cotton) or blended fabrics. Also suitable as a short programme for normally soiled laundry when you activate Programme setting: ¡... - Page 26 en Programmes Programme Description Max. load (kg) ¡ Max. 1400 rpm Fintvätt/Silke Wash delicate, washable items made from silk, vis- (Delicate / Silk) cose and synthetic fabrics. Use a detergent that is suitable for delicates or silk. Note: Wash especially delicate items or items with hooks, eyelets or clips in a mesh laundry bag.
-
Page 27: Laundry
Programmes en Programme Description Max. load (kg) Tip: Use the Syntet programme to wash heavily soiled laundry. Programme setting: ¡ Max. 40 °C ¡ Max. 800 rpm Iron Assist Suitable for shirts, T-shirts and similar fabrics made (Easy Ironing from cotton, linen or blended fabrics. Steam Assisted) Programme for warming and steaming dry items using steam in order to hang them up once the... - Page 28 en Programmes Programme Description Max. load (kg) ¡ After a prolonged period of non-use Use washing powder that contains bleach. Place the washing powder containing bleach in the manual dosing compartment. → "Detergent drawer", Page 17 Halve the amount of detergent to avoid foaming. Do not use fabric softener.
-
Page 29: Preparing The Laundry
Accessories en 10 Accessories Use original accessories. These have been made especially for your appli- ance. Note: Some accessories are avail- able in other colours. Contact → "Customer Service", Page 54. Order num- Water inlet hose ex- Extend the water inlet hose for cold water WMZ2381 tension or AquaStop (approx. -
Page 30: Basic Operation
en operation ¡ Do not mix different liquid deter- 13.3 Adjusting the pro- gents gramme settings ¡ Do not mix detergent and fabric softener Requirement: A programme has ¡ Do not use products that have ex- been set. pired or are highly congealed → "Setting a programme", Page 30 ¡... -
Page 31: Starting The Programme
operation en Note: Observe the information about The appliance door remains detergents and care products locked for safety reasons if the temperature and water levels are → Page 29. high. Pull out the detergent drawer. – If the temperature is high, start Pour in detergent. the Sköljning programme. -
Page 32: Childproof Lock
en Childproof lock Wipe the rubber gasket dry and re- 15 Intelligent dosing sys- move any foreign objects. The optimum quantities of liquid de- tergent and fabric softener are dis- pensed automatically depending on the programme and settings. 15.1 Starting the programme with intelligent dosing system If you do not want to dose liquid de- Leave the appliance door and de-... -
Page 33: Filling The Dispensers
Intelligent dosing system en If you want to replace the liquid de- Requirements ¡ The laundry is prepared. tergent or fabric softener in the dis- penser with another product, clean → "Preparing the laundry", Page 29 ¡ The laundry is sorted. the detergent drawer beforehand. → "Cleaning the detergent drawer", ¡... -
Page 34: Basic Dosage
en Intelligent dosing system If required, pour washing aid into the compartment for manual dos- ing. → "Adding detergent and care product", Page 30 Push in the detergent drawer. Adjust the basic dosage → Page 34. 15.3 Basic dosage The basic dosage depends on the manufacturer's instructions for the de- tergent, the water hardness and the degree of soiling of the laundry. -
Page 35: Basic Settings
Basic settings en 16 Basic settings You can configure the basic settings for your appliance to meet your needs. 16.1 Overview of the basic settings Basic setting Programme Value Description position End signal 0 (off) Set the volume of the signal at the 1 (quiet) end of the programme. -
Page 36: Changing The Basic Set- Tings
en Programme counter 16.2 Changing the basic set- 18 Cleaning and servi- tings cing Set the programme selector to po- To keep your appliance working effi- sition 1. ciently for a long time, it is important to clean and maintain it carefully. 18.1 Cleaning the drum CAUTION Risk of injury! Permanently washing at low temper-... -
Page 37: Cleaning The Detergent Drawer
Cleaning and servicing en Remove the pump unit. 18.2 Cleaning the detergent drawer If you want to replace the liquid de- tergent or fabric softener in the dis- penser with another product or if the detergent drawer is dirty, clean the detergent dispenser. ATTENTION! The pump unit contains electrical components. -
Page 38: Cleaning The Drain Pump
en Cleaning and servicing Clean the pump unit with a damp cloth. Clean the housing of the detergent drawer in the appliance. Clean the detergent drawer and the cover with a soft, damp cloth or hand shower. Push in the detergent drawer. 18.3 Cleaning the drain pump Dry the detergent drawer, cover Clean the drain pump regularly, at... - Page 39 Cleaning and servicing en Open and remove the mainten- CAUTION - Risk of scalding! ance flap. When you wash at high temperat- ures, the detergent solution gets hot. Do not touch the hot detergent ▶ solution. To allow the detergent solution to flow out into the container, remove the sealing cap.
- Page 40 en Cleaning and servicing Insert the pump cap. Cleaning the drain pump Ensure that the parts of the Requirement: The drain pump is ‒ pump cap are correctly as- empty. → Page 38 sembled. Since water may remain in the drain pump, unscrew the pump cap carefully.
- Page 41 Cleaning and servicing en Insert the mains plug. Before the next wash Switch on the appliance. To prevent unused detergent from Pour 1 litre of water into the flowing straight into the outlet in the manual dosing compartment. next wash, run a suitable programme for draining after you have emptied Select a suitable programme for the drain pump.
-
Page 42: Troubleshooting
en Troubleshooting 19 Troubleshooting You can rectify minor faults on your appliance yourself. Read the troubleshoot- ing information before contacting after-sales service. This will avoid unneces- sary costs. WARNING Risk of electric shock! Improper repairs are dangerous. Repairs to the appliance should only be carried out by trained specialist ▶... - Page 43 Troubleshooting en Fault Cause and troubleshooting "E:30 / -80" Immediate measure: Mix one tablespoon of fabric ▶ softener with 0.5 litres of water and pour the mix- ture into the compartment for manual dosing (not for outdoor clothing, sportswear or items stuffed with down).
- Page 44 en Troubleshooting Fault Cause and troubleshooting "E:30 / -10" and/or To reset the error message, switch the appliance off. Switch the appliance back on. If the error message is displayed again, call cus- tomer service. → "Customer Service", Page 54 The detergent drawer has not been pushed in fully. Push in the detergent drawer until the symbol goes ▶...
- Page 45 Troubleshooting en Fault Cause and troubleshooting "E:30/-20" Solenoid valve defective. Call the after-sales service. ▶ → "Customer Service", Page 54 All other error codes. Malfunction Switch the appliance off and then on again. If the message appears again, disconnect the appli- ance from the power supply for at least 30 seconds by pulling out the plug or by switching off the relev- ant circuit breaker in the fuse box.
- Page 46 en Troubleshooting Fault Cause and troubleshooting The programme does Switch the appliance on. not start. If the display appears again after you clean the pump unit, call customer service. → "Customer Service", Page 54 Note: You can deactivate and manually dose the intel- ligent dosing system until the fault is rectified. → "Buttons", Page 23 The door cannot The temperature is too high.
- Page 47 Troubleshooting en Fault Cause and troubleshooting The water is not drain- Unapproved extension installed on the water drain ing. hose. Remove any unapproved extensions from the water ▶ hose. → "Connecting the appliance", Page 14 The pump cap is not fully screwed in. Ensure that the pump cap is screwed in all the way ▶...
- Page 48 en Troubleshooting Fault Cause and troubleshooting No water is visible in Water is below the visible area. the drum. Not a fault – no action required. ▶ Do not add any extra water to the appliance while it ▶ is operating. Drum jerks after the This is caused by an internal motor test.
- Page 49 Troubleshooting en Fault Cause and troubleshooting High spin speed not Unbalance load detection system is using a reduced reached. spin speed to eliminate an unbalance. Redistribute the laundry in the drum. ▶ Note: Where possible, mix large and small items in the drum. Different sized items of laundry distribute themselves better during the spin cycle.
- Page 50 en Troubleshooting Fault Cause and troubleshooting Slurping, rhythmical The drain pump is active, the detergent solution is suction noise. pumped out. Not a fault – normal operating noise. ▶ Creasing. The spin speed is too high. The next time you run a wash cycle, set a lower ▶...
- Page 51 Troubleshooting en Fault Cause and troubleshooting Detergent residue on Detergents may contain water-insoluble substances the damp washing. that deposit on the laundry. Start the Sköljning programme. ▶ Unsuitable detergent added to the dispenser of the in- telligent dosing system. Check whether the detergent used is suitable. → "Detergents and care products", Page 29 Drain the dispenser.
- Page 52 en Troubleshooting Fault Cause and troubleshooting Insufficient cleaning. Refill the dispenser. → "Filling the dispensers", Page 33 Unsuitable detergent added to the dispenser of the in- telligent dosing system. Check whether the detergent used is suitable. → "Detergents and care products", Page 29 Drain the dispenser. → "Cleaning the detergent drawer", Page 37 Clean the dispenser.
-
Page 53: Emergency Release
Transportation, storage and disposal en 19.1 Emergency release 20.2 Inserting the transit bolts Releasing the door Secure the appliance before trans- Requirement: The drain pump is portation using transit bolts in order empty. → Page 38 to prevent transport damage. ATTENTION! Escaping water may Use a screwdriver to remove the 4 cause material damage. -
Page 54: Disposing Of Old Appliance
en Customer Service 20.4 Disposing of old appli- 21 Customer Service ance Function-relevant genuine spare parts Valuable raw materials can be re- according to the corresponding Eco- used by recycling. design Order can be obtained from Customer Service for a period of at WARNING least 10 years from the date on Risk of harm to health! -
Page 55: Consumption Values
Consumption values en 22 Consumption values The following information is provided in accordance with the EU Ecodesign Regulation. The values given for programs other than the Eco 40-60 are indicat- ive only and were determined in accordance with the applicable standard EN60456. The automatic dosing function has been deactivated for this pur- pose. - Page 56 en Technical data Minimum in- 10 A Length of the wa- 150 cm stallation protec- ter outlet hose tion Length of the 210 cm Nominal power 2300 W power cord Power consump- ¡ Off mode: You can find more information about tion 0.10 W your model online at https:// ¡...
- Page 60 Expert advice for your Bosch home appliances, help with problems or a repair from Bosch experts. Find out everything about the many ways Bosch can support you: www.bosch-home.com/service Contact data of all countries are listed in the attached service direct- ory.