Step 3: Connect The Power Supply - Xerox DocuMate 262 User Manual

Step 3: Connect the Power Supply

DocuMate 262 Scanner User's Guide
Connect the power supply and power cord, and plug the power
supply into an electrical outlet.
To connect your DocuMate 262 scanner:
1. Plug the power supply into the power port on the scanner.
NOTE: Only use the power supply (HEG42-240200-7L made by
HiTron) included with your scanner. Connecting any other type
of power supply may damage your scanner, and will void its
warranty.
2. Plug the power cord into the power supply and into a wall
outlet.
Now proceed to the next section, "Step 4: Connect the USB
Cable and Turn on the Power."
Installation
13