Standard Specification of Stereo System Error Message Display Contents
Error Contents
CD
Pickup Mechanism Error.
CD Changer Mechanism Error.
CD DSP Communication Error
Focus Not Match.
TUN
PLL Unlock.
(*) CHECKING:
If CD changer mechanism error is detected, 'CHECKING' will be display instead of 'ER-CD**' display 'ER-CD**' will only be display
when CD changer mechanism error had been detected for the 5 th times.
Speaker abnormal detection and +B PROTECTION display
In case speaker abnormal detection or +B PROTECTION had occured, it can be check by pressing 'POWER', 'VIDEO' and 'X-
BASS' key twice. Display will show "S** B**". S is referring to speaker abnormal detection and B is referring to +B PROTECTION.
** is in hex valve.
+B PROTECTION is condition when irregular process occur on power supply line.
BEFORE TRANSPORTING THE UNIT
The following process need to be taken after set tapering/parts replacement.
1. Press the Power On Button to enter Power Stand-by mode.
2. While pressing down the
3. While pressing down the
"FINISHED" appears.
4. Unplug the AC cord and the unit is ready for transporting.
DISPLAY
'ER-CD**'
'ER-CD**'
(*)
'ER-CD**'
'NO DISC'
FM 87.50 MHz
button and the X-Bass/Demo button, press the Power button until "CLEAR AL" appears
button and the X-Bass/Demo button , press the Power button until "WAIT"
01: PU-IN SW Detection NG.
10: Changer Error.
11: Initial Error.
31: DSP COMMUNICATION ERROR
PLL Unlock.
– 13 –
CD-E800W
Notes