4-13. Upgrade
4-13-1. Updating the Program - MAIN
�
How to connect
- Connect the serial port of the PC and the input serial port of Beethoven Board with the RS232C cable.
- Option in the Factory Menu : Check if BaudRate is set to 115200.
Run the .exe file and press the "OK" button, then press "Next" to complete the installation. (Attached)
The program is not affected by Windows OS system.
When the installation is complete using the Setup.exe file, the icon
Double click the icon to run the program.
RS-232C, a standard of serial communication, is used for the communication between a
PC and a display. Therefore, a serial cable should be connected between the serial port on
a PC and the serial port on a display.
Refer to the diagram.
appears on your desktop.
4. Troubleshooting
4-29