Samsung 400DXn Service Manual page 26

WHITE BALANCE Part

Sharpness Part

Adjusting the sharpness of displayed image.
This function is used to adjust the appropriate value for each target region. Change only
when it is needed.
Motion Part

Used for color control.
But excessive setting may saturate the color.
Extreme caution needed.!!
Register value in the Scaler
Adjust the Gain and Offset
Motion Adaptive De-Interacing
This function reduces image dragging around moving object
and relives blinking around suspended object.
MADI QUANT THRESH / GAIN : MADI QUANT THRESH is 3
4. Troubleshooting
RED / BLUE / GREEN
divided grade of motion rate.
Detecting the motion degree by
comparing frames, it controls
de-interacing rate.
4-11