Quick Install Steps (Appletalk Protocol) - Xerox DocuPrint N4525 Network Installation Manual

Quick install steps (AppleTalk protocol)

1.
At the Desktop, right-mouse-click the Network Neighborhood
icon and select Properties.
2. Click the Protocols tab and verify that the AppleTalk protocol has
been loaded.
3. If the AppleTalk software is not present, install it using the
documentation provided by Microsoft, and then return to this
document.
4. Open the Control Panel and double-click the Printers icon.
5. Double-click Add Printer; the Add Printer Wizard starts.
Verify that My Computer is selected and click Next>.
6.
Click Add Port.
7.
Select the AppleTalk Printing Devices and click New Port.
8.
9. Click Ethernet and select the device.
10. Choose your printer device from the list, then click OK.
11. Click OK. The Wizard returns you to the previous dialog. Verify
that the port name you entered is in the list and is correct. The
check box to the left of the port name must be checked; if it is not,
check it, and then select Next>.
12. Insert your printer's CD-ROM into your computer's CD-ROM
drive and click Have Disk.
13. Click the Browse button and select the directory containing the
Windows NT drivers: <CD Drive>:\instal\winnt40, and then
click Open.
Select the *.INF file, then click OK.
14.
15.
The Wizard returns you to the previous dialog. Verify that the
path and file name are correct and click OK.
16. At the next dialog, enter a name for the printer and select whether
you want that printer to be the default, and then click Next>.
17. If the printer is not shared, click Next>. To share the printer, enter
a Share Name, check the share checkbox, and then click Next>.
18. At the next dialog it is recommended that you print a Test Print.
Click Finish.
12
DocuPrint N4525 Network Laser Printer