Xerox DocuPrint 92C Installation Planning Manual page 119

Item
description Default
FSSNAME None
MSGDEST JES
PNAME None
SYSTEM Same as
specified in
JUNIT
parameter of
DEVICE
statement
TERM NO
TYPE
BURST YES
COPYMARK J
XEROX DOCUPRINT 92C IPS INSTALLATION PLANNING GUIDE
•
One FSSDEF statement for each PSF functional
subsystem
•
One DEVICE statement for each functional subsystem
application (FSA) under control of the FSS.
The following table lists the JES3 FSS statement parameters to
be defined.
Table E-3.JES3 FSS statement parameters
Range of
acceptable
Source of value values
Installation 1 to 8-character
preferences alphanumeric
string
Installation JES or a
preferences destination class
name
Name of the FSS 1 to 8-character
procedure alphanumeric
string
System ID of Valid system ID
system the FSS name
is to run on.
Installation YES or NO
preferences
TYPE=WTR WTR
must be specified
Installation YES or NO
preferences
,M
Installation N or J or C
preferences
DEFINING THE PRINTER TO THE HOST: TCP/IP ATTACHMENT
Comments
Specifies name of the
FSS. (Required
parameter)
Specifies the console
destination class for FSS
messages.
Specifies the procedure
for starting this FSS.
(Different FSSDEF
statements may refer to
same procedure.)
Can also be specified as
QUEUE=
YES specifies FSS
terminates if JES3 global
address space is
terminated.
Specifies FSS is an output
writer. TYPE=WTR must
be specified.
,M specifies MARKFORM,
which causes IPS printer
to offset-stack or stitch
jobs, subject to printer's
setting and the
COPYMARK parameter.
C: IPS will offset-stack or
stitch on a dataset copy
basis.
J: Printer is to increment
offset stacking or stitching
on a job boundary.
N: Copymarks are
constant, and no offset
stacking or stitching is
done.
Your value
E-5