Ipds Setup Tab; Ipds Resolution - Xerox DocuPrint 100MX User Manual

IPDS Setup tab

IPS Gateway User's Guide (5/2002)
This section describes the options on the IPDS Setup tab (shown below).
These options allow you to manage IPDS.

IPDS Resolution

The IPDS Resolution option allows you to specify the dots per inch (dpi)
input resolution of the data and resources sent by the host.
To specify the input resolution:
Step 1. From the drop-down box in the IPDS Resolution area, select the dots per
inch (dpi) resolution that matches your host printer setup and job
resources. Valid values are 240, 300, and 600.
Step 2. Click Save to save your setting and reset IPDS as indicated; see
"Important setup
Step 3. Drain and restart the printer at the host for the change to take effect.
instructions" for more information.
IPS Gateway operation
3-10