Clearing Area 1A - Xerox 4050 Operator's Manual

SOLVING PROBLEMS

Clearing area 1A

8-6
4. If the system sent waste sheets to the sample tray, remove
those sheets and discard them.
5. Close any printer doors you opened.
6. Press the Continue button to resume printing.
7. When the job finishes printing, check the output to make
sure there are no missing or duplicate pages.
Remove and discard any paper found in area 1A.
Lift the three green handles one by one. Each time you lift a
handle, remove and discard any paper found beneath the open
section. Lower the handles before continuing.
XEROX 4050/4090/4450/4650 LPS OPERATOR GUIDE