Dimm Slots - MSI MPG B550I GAMING EDGE MAX WIFI Quick Start Manual

DIMM Slots

⚠
Important
Always insert memory modules in the DIMMA1 slot first.
∙
Due to chipset resource usage, the available capacity of memory will be a little less
∙
than the amount of installed.
Based on CPU specification, the Memory DIMM voltage below 1.35V is suggested to
∙
protect the CPU.
∙ To ensure system stability for Dual channel mode, memory modules must be of the
same type, number and density.
Some memory modules may operate at a lower frequency than the marked value
∙
when overclocking due to the memory frequency operates dependent on its Serial
Presence Detect (SPD). Go to BIOS and find the DRAM Frequency to set the memory
frequency if you want to operate the memory at the marked or at a higher frequency.
It is recommended to use a more efficient memory cooling system for full DIMMs
∙
installation or overclocking.
The stability and compatibility of installed memory module depend on installed CPU
∙
and devices when overclocking.
∙ Please refer www.msi.com for more information on compatible memory.
DIMMA1
Channel A
DIMMB1
Channel B
Overview of Components
15