Yamaha YFM 700R 2017 Owner's Manual page 41

Table of Contents

Advertisement

would be advisable to check the number of clicks
or turns of each damping force adjusting mecha-
nism and to modify the specifications as neces-
sary.
Spring preload
1. Loosen the locknut.
2. Turn the spring preload adjusting nut in direc-
tion (a) to increase the spring preload and
thereby harden the suspension, and in direc-
tion (b) to decrease the spring preload and
thereby soften the suspension.
(a)
(b)
1. Spring preload adjusting nut
2. Locknut
3. Special wrench
TIP
 A special wrench can be obtained at a Yamaha
dealer to make this adjustment.
 The spring preload setting is determined by
measuring distance A, shown in the illustration.
The shorter distance A is, the higher the spring
preload; the longer distance A is, the lower the
spring preload. With each complete turn of the
adjusting nut, distance A is changed by 1.5 mm
(0.06 in).
Spring preload setting:
Minimum (soft):
2
Standard:
Maximum (hard):
1
3
4-15
Distance A = 268.0 mm (10.55 in)
Distance A = 262.0 mm (10.31 in)
Distance A = 253.0 mm (9.96 in)
4

Advertisement

Table of Contents
loading

This manual is also suitable for:

Yfm70rsbj 2017Yfm70rsxj 2017

Table of Contents