NETGEAR Nighthawk M6 Quick Start Manual

QUICK START
5G Mobile Hotspots
To use your mobile hotspot, you need a
valid, activated nano SIM card and a data
plan from your mobile provider. For more
information, scan the QR code or visit
netgear.com/mobile-setup.
For more detailed information about
setting up and using your mobile
hotspot, scan the QR code to download
the Nighthawk M6 user manual or visit
netgear.com/m6usermanual.
NETGEAR, Inc. NETGEAR INTERNATIONAL LTD
350 East Plumeria Drive Floor 6, Penrose Two,
San Jose, CA 95134, USA Penrose Dock, Cork,
T23 YY09, Ireland
© NETGEAR, Inc., NETGEAR and the NETGEAR Logo are trademarks of
NETGEAR, Inc. Any non-NETGEAR trademarks are used for reference
purposes only.
1. GET TO KNOW YOUR DEVICE
Your mobile hotspot comes packaged with the following
components:
• Nighthawk® M6 or M6 Pro 5G Mobile Hotspot*
• Battery cover
• Battery
• USB Type-C cable
• Power adapter
*Nighthawk M6 model shown for illustrative purposes.
Touch
screen
Back
Home
External
antenna
port (TS-9)
June 2023
Power button
USB Ethernet External
Type-C port antenna
port port (TS-9)
2. INSTALL THE SIM AND BATTERY
Battery cover
Battery
Nano SIM card
Make sure that your nano SIM card matches the orientation
shown on the device label and gently insert it, then install
the battery and back cover.
NOTE: Only use your fingers to insert or remove the nano
SIM card. Using other objects might damage your device.
To charge the battery, connect the USB cable to the mobile
hotspot, then plug it into a wall socket using the AC power
adapter or a computer USB port.