Minimum Hardware Requirements For Docusp 3.6.X - Xerox Phaser 6115 Getting Started

Minimum hardware requirements for DocuSP 3.6.x

XEROX DOCUMENT SERVICES PLATFORM SERIES
GETTING STARTED
v Job, Queue, and Resource management features to
support LCDS jobs are the same as on the DocuPrint
1xx EPS systems.
v Off-line tape submission using the Tape Client interface.
v Certain limitations exist on the LCDS implementation
based on differences between the DocuPrint 1xx and
DocuTech/DocuPrint 75/90 printers. Refer to your
Xerox representative for more information.
v Support for 16 digit job numbers for LCDS jobs.
v The ability to set the DocuSP to automatically end a current
on-line job and start a new on-line job without operator
intervention.
v Refer to the Customer Letter for the Xerox Production Print
Services software version 3.6.xx for information on new
features and options available in the client drivers and Xerox
Document Submission tools.
The DocuSP 3.6.x platform hardware requirements vary by
printer type and software options, such as LCDS, required by the
customer. Refer to the specific product documentation for the
platform requirements for each printer product.
DOCUSP 3.6.xx
1-5