Table of Contents
Advertisement
Sample resource backup and restore scripts
XEROX DOCUMENT SERVICES PLATFORM SERIES
GETTING STARTED
·
When restoring files, the RBR script first makes a backup of
the resources that are currently installed on the system.
After the original files are backed up, the backup files are
restored, and then the original files are restored. This
ensures that newer files are not overwritten with older files
that are restored from the backup.
If this is not your intent, use the mv command to remove the
existing resources from their directory so that all the
resources from the backup are restored. For example:
mv /var/spool/XRXnps/resources/lcds
/export/home/xrxusr
·
Unless you are backing up files and restoring them to the
same software release, do not use the RBR utility to restore
the Stock Database programming.
You can use the Restore Stock Database option to back up
files from DocuSP 2.1 or 3.1 and restore them to DocuSP
3.6 or above.
However, if you restore the stock database programming
from DocuSP 2.1 to DocuSP 3.1, the database manager
may not comprehend the older version of the stock database
file, and the Restore process would render the software
inoperable. A scrape would then be required to correct the
problem.
Use the Backup and Restore Bridge tool delivered with your
DocuSP software to perform the Stock Database Restore.
Following are examples of resource backup and restore scripts.
Responses by the user and user-specific information provided by
the RBR utility are shown in boldface type.
Sample backup script
# ./RBR
MAIN MENU
Please enter your selection:
1) Backup resources
2) Restore resources
3) EXIT
Select (1,2,or 3)? > 1
You have selected Backup resources.
Backing up 10895 LCDS resources to
/export/home/xrxusr/jbs/wiggum_25_Jul_09:54.tar.
This may take some time.
Check /var/spool/XRXnps/log/Resource_BandR.log file to view
progress.
DOCUSP 3.6.xx
3-3
Advertisement
Table of Contents
