Advertisement
OPERATION
4
PLEASE READ SAFETY INFORMATION BEFORE USE (p3)
Before plugging the cord into the electrical outlet, make sure the switch is in the 'off' position.
Hold the vacuum cleaner firmly when starting and in use.
Assembling your cylinder
Insert the end of the
Slot the metal telescopic
hose into the unit.
extension tube and
Ensure the hose has
hose handle together.
clicked into place.
All accessories can
be fitted to the end of
the metal telescopic
extension tube.
How to use
Hard Floors
Adjust the power for
For use on carpets click rocker
different surfaces
switch forward. For use on hard
as required.
floors click rocker switch back.
Storage
Cable rewind button is located
For convenience there is a parking slot located at the
at the rear of the machine.
rear of the vacuum cleaner where the floor head and
After unplugging press the
tubes can be attached for storage and carrying.
cable rewind until the cord
is fully retracted.
Fully unwind the power
Plug in and switch the
cord. A yellow mark
unit on by pressing the
on the cord indicates
power button.
the recommended cord
length. Do not exceed
the cord beyond the
yellow mark.
Carpets
WARNING: Always switch off and unplug the vacuum cleaner from the electrical socket before
assembling, opening or emptying the dirt container, or before connecting/disconnecting the attachments.
IMPORTANT: Filters need to be cleaned every time you empty the dirt container for best cleaning results.
Do not use your vacuum cleaner without all of the filters in place.
IMPORTANT: The motor is equipped with a thermal cut-out. If for any reason the unit should overheat,
the thermostat will automatically turn the unit off.
Emptying and cleaning the dirt container
Remove dirt container
Hold the dirt container
by pushing down the
and press the dirt
dirt container release
release button located
button and lifting the
at the rear of the dirt
dirt container.
container.
Cleaning the pre-motor filter
1
2
Hold the dirt container
Lift the lid to reveal the
and twist the lid anti-
pre-motor filter.
clockwise.
4
5
40˚C
40˚C
MAX
MAX
Tap excess dirt from the filter. Rinse under a tap and leave to dry for 24 hours.
MAINTENANCE
Hold dirt container over
a bin and press dirt
release button to open,
allowing dirt to fall out.
3
Lift out the pre-motor filter.
6
24hr
5
Advertisement
