Changing The "Sound" Setting - Sony Trinitron WEGA KV-SR252 Operating Instructions Manual

x Changing the "Sound" setting
The "Sound" menu allows you to adjust the sound settings.
1
Press WEGA GATE and select "Settings".
2
Press V or v to select the "Sound"
icon ( ), then press
3
Press V or v to select the desired item (e.g., "Sound Mode"), then press
Select
"Sound Mode"
"Balance"
"Intelligent Volume"
"Surround"
* You can adjust the setting to your personal preference in the "Sound Adjustment"
option only when the "Custom" mode is selected.
** BBE High Definition Sound is fully activated maximizing the sound effect in WOW
mode.
Note
• "Intelligent Volume" is not selectable when "TruSurround" is selected or when the
microphone input terminal is connected.
Adjusting the "Sound Adjustment" items under "Custom"
mode
The 5-Band Graphic Equalizer feature allows you to adjust sound frequency settings
of "Custom" mode in the menu.
1
Make sure that "Adjust" is selected, then press
Selecting "Reset" will set your TV to the factory settings.
2
Press B or b to select the desired sound frequency, then press V or v to
adjust the setting and press
The adjusted settings will be received when you select "Custom".
Notes
• Adjusting higher frequency will affect higher pitched sound and adjusting lower frequency
will affect lower pitched sound.
• You may display the settings directly using the SOUND MODE button on the TV front panel
(see page 8) or
16
Menu Adjustment
.
To
choose either "Dynamic", "Standard" or "Custom"* (see page 11).
Press v or B to emphasize the left speaker.
Press V or b to emphasize the right speaker.
adjust the volume of all program numbers and video inputs
automatically.
Press V or v to select "On", then press
To cancel, select "Off", then press
choose either "TruSurround" (surround sound that spreads out
to the rear of a room), "WOW"** (full, deep bass sound),
"Simulated" (stereo-like monaural sound) or "Off".
.
button on the remote control (see page 9).
Sound
Sound Mode:
Sound Adjustment
Balance
Intelligent Volume:
Surround:
Select Confirm
.
.
.
Dynamic
Off
Off
End
.