Applicable Standard - Mitsubishi Electric MELSEC Q Series Programming Manual

1 OVERVIEW

1.3 Applicable Standard

Motion controller complies with a safety standard, but this fact does not guarantee that
Product will be free from any malfunction or failure. The user of this Product shall
comply with any and all applicable safety standard, regulation or law and take
appropriate safety measures for the system in which the Product is installed or used
and shall take the second or third safety measures other than the Product. MELCO is
not liable for damages that could have been prevented by compliance with any
applicable safety standard, regulation or law.
Safety observation function
1 Safety signal comparison
2 Speed monitoring function (SLS)
3 Safe speed monitor (SSM)
4 Shut-off function (STO, SS1)
5 Standstill monitoring (SS2, SOS)
6 Safe brake control (SBC)
7 Safety communication function
For Declaration of Conformity (DoC), MITSUBISHI ELECTRIC EUROPE B.V.,
declares that the Motion controllers are in compliance with the necessary requirements
and standards (2006/42/EC, 2014/30/EU and 2014/35/EU). For a copy of the
Declaration of Conformity, please consult your local Mitsubishi Electric representative.
1 EN ISO 13849-1:2015 (Cat 3 PL d)
2 EN IEC 62061:2021 (maximum SIL 2)
QDS
1 - 8
Certification standards