Advertisement
1
Apply plumbers tape around the threaded part of the shower arm.
Step 1: Apply plumbers tape around the
threaded part of the shower arm.
2
Assemble showerehad swivel joint. Once assembled connect to
the showerhead.
3
Step 1: Screw the shower arm into the plumbing.
Step 2: Insert washer into the showerhead and screw onto shower arm.
Installation Instructions
Decide where the slide bar mounts will be placed. Remove the tape cover
and apply a good amount of glue on the mounting hardware. Place the
slide bar mounts on the marked area, hold in place for a few minutes
and let the glue cure for about 48 hours. DO NOT place the slide bar or
handshower until glue is fully cured.
Mark holes for the slide bar mount. Drill and secure with provided screws.
Place slide bar onto mounts. Screw into place and install cover plates.
4.1
DRILL-LESS
Back of slider mount
Back of slide bar holder
Tape
4.2
DRILL OPTION
CAUTION: Live Plumbing
5
Glue
Step 2: Screw the show
Insert washer into the s
3
Advertisement
