Lcd Section - Sony ZV-1 Service Manual

4-2-9. LCD Section

[ 4 ] Rear cab assy (64500)
[ 5 ] MG sensor adhesive A (64500)
Refer to "Notes on Assembling
the MG sensor adhesive A (64500)".
[ 11 ] Fine-wire coaxial cable
Refer to "Notes on Assembling
the Fine-wire Coaxial Cable".
[ 3 ] SV hinge cover rear
[ 7 ] two screws
#357 (M1.7 X 4.0)
(0.18 ± 0.02 N·m)
(Note 1)
[ 2 ] SV hinge cover front
Refer to "Notes on Assembling
the SV Hinge Cover Front".
(Note 2)
[ 12 ] SV hinge assy
Note 1
This screw cannot be reused. Discard the screw removed
once in servicing. Instead, use a new screw.
このねじは再利用することができません。
サービス対応時に一度でも外した場合は新品のねじと交換
してください。
[ 18 ] Grip rear adhesive (64500)
[ 1 ] screw
#284 (1.4 X 3.0)
(Tapping)
(0.12 ± 0.01 N·m)
Install direction
[ 10 ] SV WP cable grommet
Refer to "Notes on Assembling
the SV WP Cable Grommet".
[ 13 ] Service panel front assy
[ 17 ] Grip rear (64500)
[ 19 ] Rear cabinet (64500)
[ 9 ] Disconnect the fine-wire
coaxial cable.
(Note 4)
[ 15 ] Gascket
(CN(799))
Blue
line
[ 14 ] Sensor magnet
Refer to "Notes on
Assembling the
Sensor Magnet".
Sony CONFIDENTIAL
For Authorized Servicer
[ 8 ]
Refer to "Notes on Assembling
the Rear Panel Cab Assy (1) (2)".
(Note 3)
[ 16 ] Rear panel cab assy
Install direction
Blue
line
[ 6 ] two screws
#357 (M1.7 X 4.0)
(0.18 ± 0.02 N·m)
(Note 1)
62
SYS SET