Table of Contents
Advertisement
IMPORTANT INSTRUCTIONS
Please read these instructions carefully prior to carrying out assembly and using for the first time. They contain
information which is important for your safety as well as for the use and maintenance of the device. Keep these
instructions in a safe place for reference purposes, maintenance work and to assist you when ordering spare
parts.
The training device is intended for home use as well as for commercial use and be operated in dry rooms. For com-
mercial use, the stationary training device must be operated in a supervised room.
FOR YOUR SAFETY
This device can be used by people 14 years of age and
ƒ
older, as well as those with reduced physical, sensory
or mental abilities or lack of experience and knowled-
ge when supervised or have been instructed on the
safe use of the device and understand the resulting
dangers.
Children are not allowed to play with the device.
ƒ
Cleaning and user maintenance must not be carried
out by children without supervision.
DANGER! During assembly of the product, keep chil-
ƒ
dren away (Swallow small parts).
DANGER! The device requires a mains voltage of 230V,
ƒ
50Hz. - Connect the power cord to a properly groun-
ded socket. Do not use multiple sockets for connection!
If an extension cable is used, it must comply with VDE
guidelines. The device may only be used with the ori-
ginally supplied power adapter. Never intervene in the
main power supplying the product yourself, if necessary,
hire qualified personnel. Make sure that the electrical
cable does not become trapped or becomes a "trip
hazard".
WARNING! This device is designed exclusively for home
ƒ
use and may only be used in dry interior areas.
Any other use is prohibited and potentially dangerous.
ƒ
The manufacturer cannot be held responsible for dama-
ge caused by improper use.
The device may only be used for its intended purpose
ƒ
(i.e. for the physical training of adults).
DANGER! Inform people present (especially children) of
ƒ
possible dangers during the exercise.
DANGER! Always pull the mains plug before any repair,
ƒ
mainenance, and before cleaning.
DANGER! Improper repairs and structural changes
ƒ
(disassembly or original parts, attachment of non-appro-
ved parts, etc.) may pose a risk to the user.
DANGER! All electrical devices emit electromagnetic
ƒ
signals when they are in operation. Be careful not to use
particularly high radiation devices in the vicinity of the
cockpit or control electronics, otherwise the displayed
values could be falsified (i.e. heart rate measurement).
WARNING! Please also pay attenton to the instructions
ƒ
for training in the training instructions.
WARNING! All interventions/manipulations of the de-
ƒ
vice not described here can cause damage or endanger
the user. Further interventions are only permitted by
specially trained personnel.
WARNING! The training device is intended exclusively
ƒ
for home use. You train with a device that has been
designed according to the latest safety standards.
Possible danger points that can cause injuries are
avoided and secured in the best possible way. In case
of doubt and if you have any questions, please contact
your dealer or HOI BY KETTLER Service. Carry out a
check of all equipment parts, especially the screws and
nuts, approximately every 1 to 2 months. Before start-
4
ing yourtraining, have your family doctor clarify whether
your health is suitable for training with this device. The
medical findings should be the basis for the construc-
tion of your training program. Incorrect or excessive
training can lead to damage to your health.
Before each use, always check all screw and plug con-
ƒ
nections as well as respective safety devices for their
correct fit.
Our products are subject to constant, innovative quality
ƒ
assurance. We reserve the right to make technical
changes resulting from this.
The location of the device must be chosen in such a way
ƒ
that sufficient safety distances to obstacles are ensu-
red. The free area around the machine must be at least
1 meter larger than the training area. Make sure that no
one else is in the free area while the device is in use.
Observe the general safety regulations and precautions
ƒ
for handling electrical equipment.
When not in use for a long period of time, unplug the
ƒ
product from the power outlet.
Only exercises from the training instructions may be
ƒ
carried out on this training device.
The training device must be setup on a level surface.
ƒ
Place suitable cushioning material underneath (rubber
mats or similar) to absord shock. Only for devices with
weights: avoid hard impact of the weights.
When assembling the product, pay attention to the
ƒ
recommended rotational dimensions (= xx Nm).
The actual human performance performed may differ
ƒ
from the mechanical performance displayed.
For devices without a freewheel, note that the moving
ƒ
parts cannot be stopped immediately.
The training device complies with DIN EN ISO 20957-
ƒ
1:2014-05/DIN EN ISO 20957-5:2017-04, class SA.
B and C class devices are not suitable fore high accura-
ƒ
cy.
The product is not suitable for a body weight of more
ƒ
than 150kg.
The device has an elecromagnetic braking system. This
ƒ
is a speed-dependent/speed-independent depending on
the computer setting.
HEART RATE MONITORING / HRC TRAINING
DANGER! Heart rate monitoring systems may be inac-
curate. Excessive exercise can result in serious injury or
death. Stop exercising immediately if you feel dizzy or
weak.
WARNING! If the pulse signal is lost, the power from the
device will stay constant for 60 seconds and then slowly
ramp down. Please check your heart rate measurement
system (e.g. heart rate chest strap) so that the signal
can be picked up again by the electronics. For heart rate
training (HRC) a chest strap is recommended for better
accuracy.
This manual can also be downloaded from
www.kettlersport.com
ASSEMBLY INSTRUCTIONS
DANGER! Ensure that your working area is free of possible
sources of danger, for example don't leave any tools lying
around. Always dispose packaging material in such a way
that it may not cause any danger. There is always a risk of
suffocation if children play with plastic bags!
Ensure that you have received all the parts required
ƒ
(see checklist) and that they are undamaged. Should
you have any cause for complaint, please contact your
HOI BY KETTLER dealer or HOI BY KETTLER service.
Before assembling the equipment, study the drawings
ƒ
carefully and carry out the operations in the order
shown by the diagrams. The correct sequence is given
in capital letters.
The equipment must be assembled with due care by an
ƒ
adult person. If in doubt call upon the help of a second
person, if possible, technically talented.
The fastening material required for each assembly step
ƒ
is shown in the diagram inset. Use the fastening material
HANDLING THE EQUIPMENT
CAUTION! We do not recommend using the device in the
immediate vicinity of damp rooms due to the associated
formation of rust.
Before using the equipment for exercise, carefully check
ƒ
to ensure that it has been correctly assembled.
Familiarize yourself thoroughly with all the functions
ƒ
and settings of the unit prior to beginning your first
training session.
Any slight, design related noise that may occur when
ƒ
the fywheel rotates has no effect on the function of the
device. Any noises that occur during reverse pedalling
result from technical reasons and are absolutely harm-
less.
The training device has an electro-magnetic brake
ƒ
system.
Before each use, always check all screws and plug
ƒ
MAINTENANCE - SERVICE - SPARE PARTS
Damaged components may endanger your safety or
ƒ
reduce the lifetime of the equipment.
SPARE PARTS ORDER PAGE 33
When ordering spare parts, always state the full article num-
ber, spare-part number, the quantity required and the S/N
of the product (see handling).
Example order: Art. no.BK1055-XXX/ spare-part no.
7000XXXX/ 1 pieces / S/N .................... Please keep original
packaging of this article, so that it may be used for trans-
port at a later date, if necessary. Goods may only be retur-
ned after prior arrangement and in (internal) packaging,
which is safe for transportation, in the original box if possib-
le. It is important to provide a detailed defect description /
damage report!
exactly as instructed.
Please note that there is always a possible risk of injury
ƒ
with every use of tools and with manual activities. The-
refore, proceed carefully and prudently when assemb-
ling the device!
Bolt all the parts together loosely at first, and check
ƒ
that they have been assembled correctly. Tighten the
bolts by hand until resistance is felt, then use the indica-
ted tool to finally tighten completely. Then check that all
screw connections have been tightened firmly.
For technical reasons, we reserve the right to pre-as-
ƒ
semble components (e.g. addition of tubing plugs).
connections as well as the respective safety devices
to ensure their proper function.
Wear suitable footwear (i.e. sports shoes) when using
ƒ
the equipment.
If available, please adjust the handlebars and saddle
ƒ
so that you can find the most comfortable training
position for you individual body size.
WARNING! Protruding adjustments devices can en-
ƒ
danger the movement of the user.
To ensure that the safety level is kept to the highest
ƒ
possible standard, determined by its construction, this
product should be serviced regulary (once a year) by
specialist retailers.
Please ensure that liquids or perspiration never enter
ƒ
the machine or the electronics.
Therefore, replace damaged or worn components imme-
ƒ
diately and remove the device until is has been repaired.
Only use original HOI BY KETTLER spare parts.
Important: spare part prices do not include fastening
material if fastening material (bolts, nuts, washers etc.) is
required, this should be clearly stated on the order by adding
the words "with
fastening material".
DISPOSAL INSTRUCTIONS
HOI BY KETTLER products are recyclable.
At the end of its useful life please dispose of this
article correctly and safely (local refuse sites).
5
Advertisement
Table of Contents
