Technics SC-EH600 Operating Instructions Manual page 43

Recording from compact discs
jFor SC-EH5001
You can link up another CD when "LINK" flashes after editing a CD.
Q Press
A
OPEN/CLOSE to replace the CD with
another one.
Press ^ OPEN/CLOSE again to close the tray.
Press >.
Linking will start.
To continue linking tracks;
Repeat steps Q and 0.
As long as there is space on the tape to record, when the recording
finishes, the cassette deck will put linking on standby.
To cancel the LINK function:
Press ■ on the CD player.
Linking programmed tracks 0
© Perform step Q above, and then press PROGRAM on the remote
control.
© Select the track number from the remote control with the numeric
button(s).
© Repeat step © until all desired tracks are programmed (max.
24 tracks).
@ Press ►. Linking will begin.
Notes
•When the display shows "0:00", you cannot record from another
CD. Press ■ on the CD player.
•If the time remaining on the tape is shorter than the length of a track
to be recorded, you cannot record a track. Replace with a track
shorter than the time remaining on the tape or press ■ on the CD
player.
43