Advertisement
VCR Plus+ Setup (continued)
In order for the VCR to read the VCR Plus+ code, some set up is required. A Guide (VCR Plus+) channel number is assigned to
each local broadcast and cable station. Because this number sometimes differs from the channel your TV receives the station
on, it is necessary to program the VCR with local channel information.
S00
ADD/
DELETE
IO
© © ON
ai
Channel Setup Preparations
NOTE: Complete the steps on this page if your
VCR hook-up resembles "B" on page 24.
Prepare a list like the example below.
This list will help you smoothly enter the
information needed in step "4" at right.
You will need the following to complete the list:
Bl A line up of normal and/or cable stations you
receive along with the channel numbers your
TV receives them on. A cable channel line-up
chart is supplied by your cable company.
Bl A list of Guide (VCR Plus+) channel numbers
assigned to the stations you receive. This list is
available in TV Guide and the TV listings found
in selected newspapers.
1 Make a chart with 3 columns like the example
below. In the left column, fill in the name or call
letters of the stations you receive.
2 In the middle column, fill in each station's
assigned Guide (VCR Plus+) number found in
TV Guide, newspapers, etc.
3 In the right column, fill in the channel number
that your TV receives the station on from your
channel line-up.
EXAMPLE ONLY
Assigned
|Channel
no.
Broadcast
or Cable
Guide
your TV
Station Name
Nickelodeon
|
VCR Plus+ Channel Setup
For Connection Type B (page 24) only
* Before you begin, complete the Channel Setup
Preparations below left.
Important Note:
if your VCR connection type changes from type A to B,
repeat steps 1-4 of page 25 and select VCR>CABLE/DSS
BOXPTV or VCR» TV before proceeding with these steps.
QD
A Push MENU to
Q
display the menu.
SET UP VCR
SET CLOCK
CHAN
10 }OMA/ LANGUE: ENGL I SH
SELECT :4 Y KEY
SET
:b KEY
END
¡MENU
KEY
` Push AV to select
^.
D «£
"SET UP CHANNEL,"
C^
and then push P to display
- - the "SET UP CHANNEL" screen.
---
SET UP CHANNEL
---
ANTENNA
SYSTEM
: CATV
AUTO
SET
^
4
` Push AV to select
e
| «G3 > "VCR Pius+ CH SET
ww
UP," and then push »
~ to display the "VCR
Plus+ CH SET UP"
CABLE/OSS
BOX SET UP
VCR Plus+ CH SET UP
SELECT: 4 Y KEY
¡> KEY
screen.
¡MENU
KEY
IMPORTANT NOTE:
For step "4," use the list you prepared. You may leave lines
blank if you don't receive that station, or if the GUIDE CH
number and the CATV (or TV) CH numbers are the same.
VCR Plus+
CH SET UP
^"^
` Push P to move
dl
(E
the shaded area to
GUIDE CH
CATV CH
O
e
:
ve
the right side.
>
--
SELECT:A Y KEY
SET
:É KEY
END
:MENU KEY
Then, push AV to change CATV
or TV CH number.
Next, push 4 to set the number.
VCA Plus+
CH SET UP
GUIDE CH
CATV CH
Now, push AY to continue.
> or
=
a
this operation until the list is
SELECT:4 Y KEY
:
E
complete.
END
MENU KEY
To Make Corrections
Push AV and P to select the incorrect CATV or TV CH number.
Then, push AV to change, or ADD/OLT to delete the channel.
Push
MENU three times
Q
, to exit the VCR Plus+ CH
SET UP mode.
* Make each entry within 5 minutes or the VCR will leave this mode. '
EN
(NOTES)
- Once local channels have been programmed, they will stay in
|
«AX
memory, even in the case of a power failure.
:
X
ae
:
ad
Advertisement
