Table of Contents
Advertisement
Before attempting to set the MIDI function, let's take a brief look at what MIDI is.
The letters MIDI stand for Musical Instrument Digital Interface, an international standard for connecting
synthesizers, drum machines, and other electronic instruments so that they can exchange performance data.
Instruments equipped with MIDI have three jacks for exchanging data: IN, OUT, and THRU.
Each uses a
special cable with a DIN connector for connection (see p. 11).
IN:
For receiving keyboard, timbre, and other data.
OUT:
For sending keyboard, timbre, and other data.
THRU:
For sending received data to another instrument without processing.
Electrical and electronic musical instruments equipped with MIDI are able to transmit and receive performance
data such as for keyboard and timbre.
Depending on the connection method, instruments are grouped as those which receive data (producing sound
according to data received from the connected instrument), those which send data (to the instruments to which
they are connected), and those which both send and receive data.
_The cable is connected to the MIDI IN jack of the instrument receiving data and to the OUT jack of the sending
instrument. The THRU jack is used when the data received is to be sent to another instrumeni.
MIDI uses what are known as "channels" as a means of transmitting data for playing a specified instrument.
There are two types of channels, one for receiving and one for sending, and MIDI instruments are normally
equipped with both types. Receive channels are used when an instrument receives data from another
instrument, and send channels are used for transmission to another instrument.
For instance, let's say that three instruments are connected for playing in this way:
OUT
=
IN]
THRU
PT
IN
m]
Transmit
Receive
Receive
Instrument [1], which is sending, transmits the send channel along with keyboard and other data to
instruments [2] and [3], which are receiving. This data is sent to instruments [2] and [3], but the data will not
be received unless the receive channel for these two instruments maiches the send channel used by
instrument [1].
There are 16 channels each (1 through 16) available for both sending and receiving.
Advertisement
Table of Contents
