Advertisement
» Examples:
• Press the "00" key and then
the "3" key.
• Press the "20" key and then
the "0" key.
• Press the "40" key and then
the "2" key.
4.3
Setting the channel
With the piano in the programming mode, press the PIANO 2 switch so that it flashes to indicate that the interface is waiting for
a channel specification. (It is also possible to turn the MULT! TIMBRE function ON and OFF. See following section.)
I
Flashes.
O
-'b- O
O
O
O
O
O
O
Flashes.
PIANO
1
HARPSI-
HARPSI
VIBRA-
E PIANO
E PIANO
CHORD
CHORD
PHONE
1
?
1
2
TREMOLO
CHORUS
Select the channel by pressing the one of the first 16 white keys at the lower end of the keyboard.
^
-
Channel No.
You have 16 channels to
choose from.
Pressing one of these keys automatically sets the instrument's sending and receiving channel to the number selected.
Note: When the power is first applied, the interface uses Channel 1 and has the OMNI parameter on. Changing to another channel
automatically turns the OMNI parameter off. In OMNI mode, information from all channels is received.
8
Advertisement
