Pad Care Instructions; After Use And Storage - Shark Pro Steam S3601 Series Owner's Manual

Pocket mop
Table of Contents

Advertisement

MAINTAINING YOUR STEAM MOP
WARNING: To reduce
DIRT GRIP™ POCKET PAD
the risk of shock and
Before washing, close the hook-and-loop fasteners
unintended operation,
so they won't snag on the Dirt Grip Pocket Pads�
unplug unit before
Machine wash the Dirt Grip Pocket Pads separately
servicing.
with warm water using liquid detergent�
NEVER USE BLEACH, POWDERED DETERGENT,
OR FABRIC SOFTENERS as they may damage or
leave a coating on the Dirt Grip Pocket Pads that will
reduce their cleaning performance and absorbency�
Dirt Grip Pocket Pads should be line-dried or
tumble-dried on a low setting, as this will extend the
life of the microfiber fabric (fig. 14)�
Loose fibers can indicate wearing of the microfiber
fabric� Do not pull the loose fibers as this can cause
the weave to come undone� Simply trim the loose
fibers with scissors (fig. 15)�
REPLACEMENT
For best cleaning results, we recommend replacing
fig. 14
your Dirt Grip Pocket Pads every 3 to 4 months
following normal use� As with any fabric, dirt
particles, grease, friction, and repeated washing
can cause the fibers to break down, and you may
notice an increase in the effort needed to push or
pull the Steam Mop�
You can purchase replacement Dirt Grip
Pocket Pads and Accessories by visiting www�
sharkaccessories�com or calling 1-800-798-7398�
fig. 15
12
s h a r kc l e a n . c o m
CARE INSTRUCTIONS

AFTER USE AND STORAGE

AFTER USE AND STORAGE
NOTE: Empty the water
tank before storing your
1
When you have finished using the Steam Mop,
Steam Mop�
press the Steam Control switch until the LED light
flashes BLUE� This stops the unit from steaming�
Unplug the cord from the outlet and place the
Steam Mop into the upright position� Let the unit
cool for 2-3 minutes�
Remove the Dirt Grip™ Pocket Pad by releasing
the quick fasteners and using the loop on the side
of the pad, avoiding contact with the hot pad
(fig. 12)�
2 To store the mop on a wall hook, first allow the
mop to cool for 2 to 3 minutes, then remove the
mop head and hang up the Steam Mop by the
fig. 12
handle. (fig. 13).
fig. 13
13
s h a r kc l e a n . c o m

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pro steam se450 seriesPro steam se460 series

Table of Contents